Tenbrock, C., Fischer, F., Wissenbach, K., Schleifenbaum, J.H., Wagenblast, P., Meiners, W., Wagner, J.:
Influence of keyhole and conduction mode melting for top-hat shaped beam pro¿les in laser powder bed fusion.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 278, 116514- (2020)
https://www.scm/science/article/pii/
Schmithüsen, T.,Laag, T.,Schleifenbaum,J.H.:
Mikroskopisches Stützendesign für die nass-chemische Nachbearbeitung von LPBF-gefertigten Bauteilen aus AlSi10Mg.
RapidTech + FabCon 3.D : International Hub for Additive Manufacturing: Exhibition + Conference + Networking Erfurt, Germany, 25-27 June 2019. Proceedings of the 16th Rapid.Tech Conference, 318-334, (2019).
Schmithüsen,T.,Schleifenbaum,J.H.:
Wet-chemical support removal for additive manufactured metal parts.
Solid Freeform Fabrication 2019, August 12-14, 2019, Austin, Texas, USA. Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2051-2063, (2019)
Langi, E., Bisht, A., Silberschmidt, V.V., Ruiz, P.D., Vogt, F., Mailto, L.:
Masseling, L., Zhao, L., Characterisation of Additively Manufactured Metallic Stents. Procedia Structural Integrity 15, 41-45 (2019)
https://onlinelibrary.wiley.com/doi/10.1002
Hariharan, A., Lu, L., Risse, J.,Kostka, A., Gault, B., Jägle, E., Raabe, D.:
Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys. Physical Review Materials 3, 1123602- (2019)
https://doi.org/10.1103/PhysRevMaterials.3.123602
Duong, E., Kröger, M.,, Thombansen, U., Knaak, C., Abels, P.:
Characterisation of the optical emisson in laser powder bed fusion process.
LAMP-8th International Congress on Laser Advanced Materials Processing, 21.- 24.5.2019, Hiroshima Japan. Proceedings of LAMP2019, Additive Manufacturing, 19-046 (Th4-H2, A120628), (7 S.) (2019)
Saewe, J., Wilms, M., Jauer, L., Schleifenbaum, J. H.:
Influence of preheating temperature on hardness and microstructure of high-speed steel hs6-5-3-8 manufactured by laser powder bed fusion.
MAMC 2019, Metal Additive Manufacturing Conference, 25-27. November 2019, Örebro, Schweden, 11-19 (2019)
Qin, Y., Wen, P., Voshage, M., Chen, Y., Schückler, P.G., Jauer, L., Xia, D., Guo, H., Zheng, Y., Schleifenbaum, J.H.:
Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties.
Materials and Design 181, 107937- (2019)
https://doi.org/10.1016/j.matdes.2019.107937
Qin, Y., Wen, P., Guo, H., Xia, D., Zheng, Y., Jauer, L., Poprawe, R., Voshage, M, Schleifenbaum, J.H.:
Additive manufacturing of biodegradable metals: Current research status and future perspectives.
Acta Biomaterialia 98, 3-22, (2019)
https://doi.org/10.1016/j.actbio.2019.04.046
Brecher, C., Löpenhaus, C., Greschert, R.W., Poprawe, R., Schleifenbaum, J. H., Ziebura, D.:
Potenzial generativ gefertigter Bauteile in der Getriebetechnik.
Antriebstechnisches Kolloquium ATK 2019, Aachen, 12. - 13. März 2019. Jacobs, G./ Marheinek, J. (Hg.):Antriebstechnisches Kolloquium ATK 2019.Tagungsband, 251-264 (2019)
Bär, F., Berger, L., Jauer, L., Kurtuldu, G., Schäublin, R., Schleifenbaum, J.H., Löffler, J.F.:
Laser additive manufacturing of biodegradable magnesium alloy WE43: A detailed microstructure analysis.
ACTA MATERIALIA 98, 36-49 (2019)
https://doi.org/10.1016/j.actbio.2019.05.056
Kunz, J., Herzog, S., Kaletsch, A., Saewe, J., Schleifenbaum, J. H., Broeckmann, C., Mechanical Properties of High Speed Steel AISI M50 Produced by Laser Powder Bed Fusion.
11th TOOLING 2019 conference & exhibition, 12 - 16 May 2019, Aachen, Germany. Published in Steel Research International 91(5), Special Issue Tooling 2019, 1900562- (7 S.),(2019)
https://doi.org/10.1002/srin.201900562
Ewald, S., Kies,F., Hermsen,S., Voshage, M., Haase, C., Schleifenbaum, J.H.:
Rapid Alloy Development of Extremely High-Alloyed Metals Using Powder Blends in Laser Powder Bed Fusion.
Materials 12(10), 1706- (2019)
https://doi.org/10.3390/ma12101706
Gayer, C., Ritter, J., Bullemer, M., Grom, S., Jauer, L., Meiners, W., Pfister, A., Reinauer, F., Vučak, M., Wissenbach, K, Fischer, H., Poprawe, R., Schleifenbaum, J.H.:
Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds.
Materials Science and Engineering: C 101, 660-673, (2019)
https://doi.org/10.1016/j.msec.2019.03.101
Liu, X., Zhao, C., Zhou, X., Eibl, F., Shen, Z., Liu, W., Meiners, W.:
CNT-reinforced AlSi10Mg composite by selective laser melting: microstructural and mechanical properties.
Materials Science and Technology 35, 1038-1045, (2019)
https://doi.org/10.1080/02670836.2019.1603899
Gillet, V., Aubignat, E., Costil, S., Courant, B., Langlade, C., Casari, P., Knapp, W., Planche, M.P.:
Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP).
SURFACE & COATINGS TECHNOLOGY 364, 306-316 (2019)
https://doi.org/10.1016/j.surfcoat.2019.01.011
Voshage, M., Wen, P., Schaukellis, M., Schleifenbaum, J.H.:
Formation Quality, Mechanical Properties, and Processing Behavior of Pure Zinc Parts Produced by Laser-Based Manufacturing for Biodegradable Implants.
BERG- UND HÜTTENMÄNNISCHE MONATSHEFTE 164 (3), 133-140, (2019)
https://doi.org/10.1007/s00501-019-0829-x
Wen, P., Qin, Y., Chen, Y., Voshage, M., Jauer, L., Poprawe, R., Schleifenbaum, J.H.:
Laser additive manufacturing of Zn porous scaffolds: Shielding gas flow, surface quality and densification.
Journal of Materials Science & Technology 35(2), 368-376, (2019)
https://doi.org/10.1016/j.jmst.2018.09.065
Ewald, S., Schaukellis, M., Koehnen, P., Schleifenbaum, J.H.:
Laser Powder Bed Fusion of Advanced High-Strength Steels—Modification of Deformation Mechanisms by Increasing Stacking Fault Energy.
BERG- UND HÜTTENMÄNNISCHE MONATSHEFTE 164, 127–132, (2019)
https://doi.org/10.1007/s00501-019-0830-4
Zumdick, N.A., Jauer, L., Kersting, L.C., Kutz, T.N., Schleifenbaum, J.H., Zander, D.:
Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43.
Materials Characterization 147, 384-397, (2019)
https://doi.org/10.1016/j.matchar.2018.11.011
Zhang, D., Wang, W., Guo, Y., Hu, S., Dong, D., Ziegler, S., Schleifenbaum, J. H.:
Numerical simulation in the absorption behavior of Ti6Al4V powder materials to laser energy during SLM.
Journal of Materials Processing Technology 268, 25-36, (2019)
https://doi.org/10.1016/j.jmatprotec.2019.01.002
Tian, C., Li, X., Zhang, S., Guo, G. Ziegler, S., Schleifenbaum, J.H., Wang, L., Rong, Y.:
Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM).
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100, 1451–1462, (2019)
https://doi.org/10.1007/s00170-018-2734-y
Masseling, L., Gayer, C.:
Micro-powder bed fusion (μ-PBF) - Extremely high resolution for small-scale applications.
2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, 22-25 July 2018, Berkeley, USA. Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing2018, 45-49 (2018)
Schniedenharn, M., Schleifenbaum, J.H.:
Position-dependent part quality of the L-PBF process resulting from the laser's angle of incidence.
Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing Erfurt, Germany, 5 – 7 June 2018. Proceedings of the 15th Rapid.Tech Conference, 198-216, (2018)
https://doi.org/10.3139/9783446458123.013
Schniedenharn, M., Wiedemann, F., Schleifenbaum, J.H.:
Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry.
Rapid Prototyping Journal 24(8), 1296-1304, (2018)
https://doi.org/10.1108/RPJ-07-2017-0149
Saewe, J., Gayer, C., Vogelpoth, A., Kunz, J.s, Broeckmann, C., Schleifenbaum, J.H.:
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Plate Preheating System.
MAMC 2018, Metal Additive Manufacturing Conference, 21-23. November 2018, Wien, Austria. (10 S.), (2018)
https://doi.org/10.1007/s00501-019-0828-y
Schmithüsen, T., Bremen, S., Schleifenbaum, J.H.:
Automatable Support Removal and Surface Smoothing of Additive Manufactured Parts Made of AlSi10Mg.
The Fraunhofer Direct Digital Manufacturing Conference, March 14-15 2018, Berlin, Germany.
Müller, B. (Hrsg.): DDMC 2018 Conference Proceedings, (6 S.), (2018)
Qin, Y., Wen, P., Chen, Y., Jauer, L., Voshage, M., Poprawe, R., Schleifenbaum, J.H.:
Biogredable Zn metal implants manufactured by laser powder bed fusion.
10th Symposium on Biodegradable Metals, 26-31 August, 2018, Oxford University, Oxford, England. eCM Online Periodical , 2018, Collection 6; 10th Biometal Conference Abstracts, S. 26 - (2018)
Jauer, L., Kimm, M., Labude, N., Bienert, M., Neuß, S., Lethaus, B., D'Elia, B., Müther, M., Kopp, A., Ptock, C., Schleifenbaum, J.H.:
Process Chain for Additive Manufacturing of Magnesium Implants.
10th Symposium on Biodegradable Metals, 26-31 August, 2018, Oxord University, Oxford, England. eCM Online Periodical , 2018, Collection 6; 10th Biometal Conference Abstracts, S. 25- (2018)
Berger, L., Bär, F., Jauer, L., Schäublin, R., Schleifenbaum, J.H., Löffler, J.F.:
Microstructure of WE43 fabricated by Laser-Powder Bed Fusion in comparison to conventionsl processing routes.
10th Symposium on Biodegradable Metals, 26-31 August, 2018, Oxord University, Oxford, England. eCM Online Periodical , 2018, Collection 6; 10th Biometal Conference Abstracts, S. 21- (2018)
Geisen, O., Kersting, L., Masseling, L., Bogner, J.P., Schleifenbaum, J.H.:
Additive Manufacturing of Honeycombs Seal Strips. Turbomachinery Technical Conference and Exposition, GT2018, June 11-15, 2018, Oslo, Norway. Proceedings of ASME Turbo Expo 2018, V02DT46A023, (8 S.), (2018)
https://doi.org/10.1115/GT2018-77081
Gayer, C., Abert, J., Bullemer, M., Grom, S., Jauer,L., Wilhelm Meiners, W., Reinauer, F.,Vučak, V.M., Wissenbach, K., Poprawe, R., Schleifenbaum, J.H., Fischer, H.:
Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering.
J MECH BEHAV BIOMED 87, 267-278 (2018)
Wen, P., Voshage, M., Jauer, L., Chen, Y., Qind, Y., Poprawe, R., Schleifenbaum, J.H.:
Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties.
Materials and Design 55, 36-45 (2018)
Wen, P., Jauer, L., Voshage, M., Chen, Y., Poprawe, R., Schleifenbaum, J.H.:
Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants.
J MATER PROCESS TECH 258, 128-137 (2018)
https://doi.org/10.1016/j.matdes.2018.05.057
Gayer, C.:
3D Printing Creates Patient-Specific Implants.
BioPhotonics 25(4), 38-41 (2018)
Gayer, C., Abert, J., Bullemer, M., Grom, S., Jauer, L., Meiners, W., Reinauer, F., Vučak, V.M., Wissenbach, K., Poprawe, R., Schleifenbaum, J.H., Fischer, H.:
Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering.
J. OF THE MECH. BEHAVIOR OF BIOMED. MAT. 87, 267-278, (2018)
https://doi.org/10.1016/j.jmbbm.2018.07.021
Schniedenharn, M., Schleifenbaum, J.H.:
On the Correlation of the Shielding Gas Flow in L-PBF Machines with Part Density.
DDMC-2018, Fraunhofer Direct Digital Manufacturing Conference, 14-15 March 2018 Berlin.
Müller, B. (Hrsg.): Fraunhofer Direct Digital Manufacturing Conference DDMC 2018 Proceedings, (7 S.) (2018)
Wen, P., Jauer, L., Voshage, M., Chen, Y., Poprawe, R., Schleifenbaum, J.H.:
Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 258, 128-137 (2018)
https://doi.org/10.1016/j.jmatprotec.2018.03.007
Kunz, J., Herzog, S., Kaletsch, An., Broeckmann, C., Saewe, J., Gayer, C., Schleifenbaum, J.H.:
Influence of Powder Bed Temperature on Microstructure and Post Heat Treatment of High Speed Steel AISI M50 Processed by Laser Powder Bed Fusion.
Euro PM2018 Congress & Exhibition, 14-18 October 2018, Bilbao, Spain. Euro PM2018 Congress Proceedings, AM Tool Steels, (6 S.), 2018
Köhnen, P., Haase, C., Bültmann, J., Ziegler, S., Schleifenbaum, J.H., Bleck, W.:
Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel.
Materials and Design 145, 205-217, (2018)
https://doi.org/10.1016/j.matdes.2018.02.062
Vogelpoth, A., Sharma, S., Schleifenbaum, J.H.:
Development of Adapted Ni-738 Powder for Additive Manufacturing.
Euro PM2018 Congress & Exhibition, 14-18 October 2018, Bilbao, Spain. Euro PM2018 Congress Proceedings, AM Special Materials I, (6 S.), (2018)
Saewe, J., Gayer, C., Jauer, L., Kunz, J., Broeckmann, C., Schleifenbaum, J.H.,
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steels.
Euro PM2018 Congress & Exhibition, 14-18 October 2018, Bilbao, Spain. Euro PM2018 Congress Proceedings, Special Materials I, (6 S.), (2018)
Eibl, F., Tenbrock, C.,Pichler, T., Schmithüsen, T., Heussen, D., Schleifenbaum, J.H.:
Alternative beam sources and machine concepts for laser powder bed fusion.
2017 IEEE High Power Diode Lasers and Systems Conference (HPD), 11-12 Oct. 2017 Coventry, UK. High Power Diode Lasers and Systems Conference (HPD), 2017 IEEE, p. 7-8 (2017)
https://doi.org/10.1109/HPD.2017.8261078
Kimm, M., Jauer, L., Hinke, C.,Schleifenbaum, J.H., Poprawe, R.:
Design of Flexible Implants for Preservation of Physiological Mobility exploiting Additive Manufacturing.
CAOS2017. 17th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, June 14–17, 2017, Aachen (Germany). EPiC Series in Health Science, S. 70-73 (2017) 1, 70-73 (2017)
Haase, C., Bültmann, J., Hof ,J., Ziegler, S., Bremen, S., Hinke, C., Schwedt, A., Prahl, U., Bleck, W.:
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel.
Materials 10(1), 56- (2017)
https://doi.org/10.3390/ma10010056
Berger, L., Jauer, L., Bär, F., Faude, E., Schäublin, R., Schleifenbaum, J.H., Löffler, J.F.:
Microstructure and degradaton of WE43 bone scaffolds fabricted by selctive laser melting.
9th Symposium on Biodegradable Metals, 27 August-1 September, 2017, Bertinoro, Italy. eCM Meeting Abstracts 2017, Collection 4; Biometal, S. 30 (2017)
Müther, M., Kopp, A., Ptock, C., Jauer, L., Nabude, N., Bienert, M., Neuß-Stein, S., Lethaus, B., Schleifenbaum, J.H.:
Post-processing and plasma electrolytic oxidation coating of additive manufactured magnesium scafolds.
9th Symposium on Biodegradable Metals, 27 August-1 September, 2017, Bertinoro, Italy. eCM Meeting Abstracts 2017, Collection 4; Biometal, S. 13 (2017)
Jauer, L., Kimm, M., Meiners, W., Batista Santos, R.J., Labude, N., Bienert, M., Neuß, S., Lethaus, B., Münther, M., Kopp, A., Ptock, C., Schleifenbaum, J.H.:
Additive manufacturing of magnesium alloys.
9th Symposium on Biodegradable Metals, 27 August-1 September, 2017, Bertinoro, Italy. eCM Meeting Abstracts 2017, Collection 4; Biometal, S. 10 (2017)
Zhong, C., Pirch, N., Gasser, A., Poprawe, R., Schleifenbaum, J.H.:
The Influence of the Powder Stream on High-Deposition-Rate Laser Metal Deposition with Inconel 718.
Metals (7), 443 (13 S.) (2017)
https://doi.org/10.3390/met7100443
Yesildag, N., Hopmann, C., Windeck, C., Bremen, S., Wissenbach, K.,
Merkt, S.:
Opportunities and challenges of profile extrusion dies produced by additive manufacturing processes.
32nd International Conference of the Polymer Processing Society, PPS 2016. Lyon, France; 25-29 July 2016, Code 132724. AIP Conf. Proc. 1914, 040002 (5 S.) (2017)
https://doi.org/10.1063/1.5016712
Kimm, M., Jauer, L., Hinke, C., Schleifenbaum, J.H., Poprawe, R.:
Design of Flexible Implants for Preservation of Physiological Mobility exploiting Additive Manufacturing.
CAOS2017. 17th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, June 14–17, 2017, Aachen (Germany). EPiC Series in Health Science 1, S. 70-73, (2017)
Bremen, S., Meiners, W., Wissenbach, K., Poprawe, R.:
Correlation of the High Power SLM Process with Resulting Material Properties for IN718.
BERG- UND HÜTTENMÄNNISCHE MONATSHEFTE 162 (5), 179-187 (2017)
https://doi.org/10.1007/s00501-017-0589-4
Haase, C., Bültmann, J., Hof ,J., Ziegler, S., Bremen, S., Hinke, C., Schwedt, A., Prahl, U., Bleck, W.:
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel.
Materials 10(1), 56, (14 S.), (2017)
https://doi.org/10.3390/ma10010056
Poprawe, R., Bleck, W., Piller, F.T., Schuh, G., Barg, S., Bohl, A., Bremen, S., Bültmann, J., Hinke, C., Jiang, R., Kleer, R., Merkt, S., Prahl, U., Riesener, M., Schrage, J., Weller, C., Ziegler, S.:
Direct, mold-less production systems.
Brecher, C. Özdemir, D.: Integrative Production Technology. Theory and Applications, S. 23-111 (2017)
https://doi.org/10.1007/978-3-319-47452-6_2
Poprawe, R., Hinke, C., Meiners, W., Schrage, J., Bremen, S., Risse, J., Merkt, S.:
Disruptive Innovation Through 3D Printing.
Supply Chain Integration Challenges in Commercial Aerospace, 73-87 (2017)
https://doi.org/10.1007/978-3-319-46155-7_6
Yesildag, N., Hopmann, C., Windeck, C., Bremen, S., Wissenbach, K., Merkt, S.:
Opportunities and challenges of profile extrusion dies produced by additive manufacturing processes.
32nd International Conference of the Polymer Processing Society, PPS 2016. Lyon, France; 25-29 July 2016, Code 132724.
AIP Conf. Proc. 1914, 040002 (5 S.) (2017)
https://doi.org/10.1063/1.5016712
Gayer, C.:
Laser sintering moves into the medical market.
Industrial Photonics 4(4), 16-19 (2017)
Schmithüsen, T., Eibl., F., Meiners, W.,
Untersuchungen zum automatisierten Entstützen SLM-gefertigter Bauteile.
RT ejournal - Forum für Rapid Technologie 2017
1-13 (2017)
https://www.rtejournal.de/ausgabe-14-2017/4513 (Open Access)
Schleifenbaum, J. H., Pichler, T., Hoppe, B.:
Kostenmodell für das Laserstrahlschmelzen. Kosten- und Leistungskennwerte für die additive Fertigung ermitteln und analysieren.
WT Werkstattstechnik 107, 432-438 (2017)
Zielinski, J., Mindt, H.-W., Düchting, J., Schleifenbaum, J.H., Megahed, M.:
Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing. JOM 63, (8 S.) (2017)
https://doi.org/10.1007/s11837-017-2596-z
Zhong, C., Pirch, N., Gasser, A., Poprawe, R., Schleifenbaum, J.H.:
The Influence of the Powder Stream on High-Deposition-Rate Laser Metal Deposition with Inconel 718.
Metals (7), 443 (13 S.) (2017)
https://doi.org/10.3390/met7100443
Schmithüsen, T., Eibl., F., Meiners, W.:
Untersuchungen zum automatisierten Entstützen SLM-gefertigter Bauteile
RT ejournal - Forum für Rapid Technologie 2017 (14), (13 S.) (2017)
http://www.dipp.nrw.de/lizenzen/dppl/dppl/DPPL_v2_de_06-2004.html
Knapp, W., Gillet, V., Courant, B., Aubignat, E., Costil, S., Langlade, C.:
Enhancement of low pressure cold sprayed copper coating adhesion by laser texturing on aluminium substrates
Proc. SPIE 10097, 100970P (13 S.) (2017)
https://doi.org/10.1117/12.2250870
Bremen, S., Meiners, W., Wissenbach, K., Poprawe, R.:
Correlation of the High Power SLM Process with Resulting Material Properties for IN718.
BERG- UND HÜTTENMÄNNISCHE MONATSHEFTE 162, 179-187 (2017)
https://doi.org/10.1007/s00501-017-0589-4
Bremen, S., Meiners, W., Wissenbach, K.,
Material properties of IN718 processed with High-Power Selective Laser Melting.
MAMC 2016, Metal Additive Manufacturing Conference, Industrial Perspectives in Additive Technologies, Nov 24-25, 2016 Linz. Metal Additive Manufacturing Conference, Industrial Perspectives in Additive Technologies, 2016, 52-63, (2016)
http://dx.doi.org/10.1007/s00501-017-0589-4
Habschied, M., Dietrich, S., Heussen, D., Schulze, V.:
Performance and Properties of an Additive Manufactured Coil for Inductive Heat Treatment in the MHz Range
HTM J. Heat Treatm. Mat. 71, 212-217, (2016)
https://doi.org/10.3139/105.110294
Jauer, L., Meiners, W., Vervoort, S., Gayer, C., Zumdick, N. A. Zander, D.:
Selective Laser Melting of magnesium alloys.
World PM 2016 Powder Metallurgy World Congress, 09 - 13 October 2016, Hamburg, Germany. Proc. of World PM2016 – AM - Powder Bed Based Technologies I, (6 S.) (2016)
Jägle, E. A., Sheng, Z., Wu, L., Lu, L., Risse, J., Weisheit, A., Raabe, D.:
Precipitation reactions in age-hardenable alloys during laser additive manufacturing
JOM 68(3), 943-949, (2016)
https://doi.org/10.1007/s11837-015-1764-2
Schniedenharn, M., Liu, Q.:
Aufbauratensteigerung mittels High-Power Selective Laser Melting für den Werkstoff Ti6Al4V
Rapid.Tech – International Trade Show & Conference for Additive Manufacturing
Proceedings of the 13th Rapid.Tech Conference Erfurt, Germany, 14 – 16 June 2016 München: Hanser, 36-48, (2016)
https://doi.org/10.3139/9783446450608.004
Schrage, J.:
Maschinenspezifische Kostentreiber bei der additiven Fertigung mittels Laser-Stralschmelzen (LBM)
Rapid.Tech – International Trade Show & Conference for Additive Manufacturing
Proceedings of the 13th Rapid.Tech Conference Erfurt, Germany, 14 – 16 June 2016 München: Hanser, pp. 72-89 (2016)
https://doi.org/10.3139/9783446450608.007
Witte, F., Jauer, L., Meiners, W., Kronbach, Z., Strohschein, K., Schmidt T.:
Open-porous biodegradable magnesium scaffolds produced by selective laser melting for individualized bone replacement..
Frontiers in Bioengineering and Biotechnology. Conference Abstract: 10th World Biomaterials Congress. Montréal, Canada, 17 May - 22 May, 2016
https://doi.org/10.3389/conf.FBIOE.2016.01.00708
Zumdick, N. A., Jauer, L., Kersting, L. C., Meiners, W., Kutz, T. N., Zander, D.:
Microstructure and properties of WE43 manufactured via SLM.
European Cells and Materials 32, 6-6 (2016)
Gu, D., Wang, H., Dai, D., Chang, F., Meiners, W., Hagedorn, Y.-C., Wissenbach, K., Kelbassa, I., Poprawe, R.:
Densification behavior, microstructure evolution, and wear property of TiC nanoparticle reinforced AlSi10Mg bulk-form nanocomposites prepared by selective laser melting.
Journal of Laser Applications 27(S1), 17003- (2015)
https://doi.org/10.2351/1.4870877
Gu, D., Wang, H., Dai, D., Yuan, P., Meiners, W., Poprawe, R.,
Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting.
SCRIPTA MATERIALIA 96
25-28 (2015)
http://dx.doi.org/10.1016/j.scriptamat.2014.10.011
Jauer, L., Jülich, B., Meiners, W., Voshage, M.,:
Selective Laser Melting of Magnesium Alloys
European Cells and Materials 30 (3), (1 S.) (2015)
Poprawe, R., Hinke, C., Meiners, W., Schrage, J., Bremen, S., Merkt, S.:
SLM Production Systems: Recent Developments in Process Development, Machine Concepts and Component Design.
Brecher, C. (Ed.): Advances in Production Technology, 49-65 (2015)
https://doi.org/10.1007/978-3-319-12304-2_5
Bültmann, J., Merkt, S., Hammer, C., Hinke, C., Prahl, U.:
Scalability of the mechanical properties of selective laser melting produced micro-struts
JLA 27 (S2), S29206 (8 S.) (2015)
https://doi.org/10.2351/1.4906392
Risse, J., Such, A., Meiners, W. :
Additive manufacturing in series production: Recent research topics at Fraunhofer ILT with a focus on turbomachinery.
LAMP 2015 – the 7th International Congress on Laser Advanced Materials Processing. Kitakyushu, Fukuoka, Japan, May 26-29 2015,1-5 (2015)
Merkt, S., Hinke, C., Bültmann, J., Brandt, M., Xie, Y. M. :
Mechanical response of TiAl6V4 lattice structures manufactured by selective laser melting in quasistatic and dynamic compression tests
Journal of Laser Applications 27 (S1), S17006 (6 S.) (2015)
https://doi.org/10.2351/1.4898835
Poprawe, R., Hinke, C., Meiners, W., Schrage, J., Bremen, S., Merkt, S.:
SLM Production Systems: Recent Developments in Process Development, Machine Concepts and Component Design Advances in Production Technology,
Ed. by Christian Brecher. Heidelberg [usw.]: Springer, Lecture Notes in Production Engineering, pp.49-65 (2015) (ISBN 978-3-319-12303-5)
https://doi.org/10.1007/978-3-319-12304-2_5
Thombansen, U., Gatej, A., Pereira, M.:
Process observation in fiber laser-based selective laser melting
Optical Engineering 54, S11008 (2015)
https://doi.org/10.1117/1.OE.54.1.011008
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., Poprawe, R.:
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
J. Mat. Proc. Technol. 221, 112-120, (2015)
https://doi.org/10.1016/j.jmatprotec.2015.02.013
Jauer, L., Leonards, H.:
3D-Druck und Biofabrikation: Photonische Prozesse in der Medizintechnik
RWTH-Themen: Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2014 (1), 42-45, (2014)
https://doi.org/10.18154/RWTH-CONV-089305
Buchbinder, D., Meiners, W., Wissenbach, K., Poprawe, R.:
Selective Laser Melting of aluminium die-cast alloy. Correlations between process parameters, solidification conditions and resulting mechanical properties
ICALEO 2014, International Congress on Applications of Lasers & Electro–Optics, San Diego, CA, USA (7 S.) (2014)
https://doi.org/10.2351/1.4906389
Buchbinder, D., Meiners, W., Wissenbach, K., Poprawe, R.:
Selective Laser Melting of aluminium die-cast alloy.
Fraunhofer Direct Digital Manufacturing Conference 2014. March 12-13, 2014, Berlin, Germany, (7 S.), (2014)
Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K.,
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting.
Journal of Laser Applications 26(1), (10 S.), (2014)
https://doi.org/10.2351/1.4828755
Rolink, G., Vogt, S., Sencekova, L., Weisheit, A., Poprawe, R., Palm, M.:
Laser metal deposition and selective laser melting of Fe-28 at.% Al
J. Mater. Res. 29 (17), 2036-2043 (2014)
https://doi.org/10.1557/jmr.2014.131
Thombansen, U., Gatej, A., Pereira, M.:
Tracking the course of the manufacturing process in selective laser melting
Proc. SPIE 8963, 89630O (7 S.) (2014)
https://doi.org/10.1117/12.2040330
Thombansen, U., Hermanns, T.:
In-situ measurement of the focal position in one and ten micron laser cutting
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA, Paper 179, (4 S.) (2014)
https://doi.org/10.2351/1.5063049
Thombansen, U., Hermanns, T.: Molitor, T., Pereira, M., Schulz, W.:
Measurement of cut front properties in laser cutting
Physics Procedia 56, 885-891 (2014)
https://doi.org/10.1016/j.phpro.2014.08.107
Thombansen, U., Hermanns, T., Stoyanov, S.:
Setup and maintenance of manufacturing quality in CO2 laser cutting
Procedia CIRP 20, 98 – 102 (2014)
https://doi.org/10.1016/j.procir.2014.05.037
Thombansen, U., Ungers, M.:
Illumination for process observation in laser material processing
Physics Procedia 56, 1286-1296 (2014)
https://doi.org/10.1016/j.phpro.2014.08.053
Thombansen, U., Ungers, M.:
Cognition for robot scanner based remote welding
Proc. SPIE 8963, 89630N (8 S.) (2014)
https://doi.org/10.1117/12.2040275
Papadakis, L., Loizou, A., Risse, J., Bremen, S., Schrage, J.:
A computational reduction model for appraising structural effects in selective laser melting manufacturing.
Virtual and Physical Prototyping 9, 17-25 (2014)
https://doi.org/10.1080/17452759.2013.868005
Jauer, L., Meiners, W., Poprawe, R.:
Selective Laser Melting of biodegradable metals
European Cells and Materials, Vol. 26(5), (2013)
https://doi.org/10.1007/s11661-020-05829-7
Buchbinder, D., Meiners, W., Hinke, C., Merkt, S.:
Generative Fertigung mit Selective Laser Melting auf dem Weg zur Serienproduktion?
DVS Congress 2013, Düsseldorf: DVS-Media
DVS-Berichte Bd 296 (5 S.) (2013)
https://doi.org/10.1002/latj.201190072
Hagedorn, Y.-C., Risse, J., Meiners, W., Pirch, N., Wissenbach, K.:
Processing of nickel based superalloy MAR M-247 by means of High-Temperature Selective Laser Melting (HT-SLT)
In: High Value Manufacturing. Eds.: P. J. Bartolo et. al., pp. 291-295 (2013)
Papadakis, L., Loizou, A., Risse, J., Bremen, S., Schrage, J.:
A thermo-mechanical modeling reduction approach for calculating shape distortion in SLM manufacturing for aero engine components
In: High Value Manufacturing . Eds.: P. J. Bartolo et. al., pp. 613-618 (2013)
https://doi.org/10.1201/b15961-112
Risse, J., Golebiewski, C., Meiners, W., Wissenbach, K.:
Einfluss der Prozessführung auf die Rissbildung in mittels SLM hergestellten Bauteilen aus der Nickelbasislegierung IN738LC
Tagungsband der Fachmesse und Anwendertagung für Rapid-Technologie, Erfurt : Desotron Verl. Ges. (7 S.) (2013)
Schniedenharn, M., Belting, M., Santos Batista, R. J., Meiners, W., Weisheit, A.:
Micro scale laser based additive manufacturing for metals
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miama/Fl., USA, M101 (6 S.) (2013)
https://doi.org/10.2351/1.5062946
Wilkes, J., Hagedorn, Y.-C., Meiners, W., Wissenbach, K.:
Additive manufacturing of ZrO_2 -Al_2 O_3 ceramic components by selective laser melting
Rapid Prototyping J. 19 (1), 51-57 (2013)
https://doi.org/10.1108/13552541311292736
Brandl, E., Heckenberger, U., Holzinger, V., Buchbinder, D.:
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Mat. Design 34, 159-169, (2012)
https://doi.org/10.1016/j.matdes.2011.07.067
Bremen, S., Buchbinder, D., Meiners, W., Wissenbach, K.:
Selective Laser Melting - a manufacturing method for series production
Proc. Direct Digital Manufacturing Conference DDMC 2012. Berlin, March 14-15, 2012, 6 S. (2012)
Bremen, S., Schrage, J., Meiners, W., Wissenbach, K.:
High power Selective Laser Melting - further steps towards series production
Proceedings of the International Conference on Additive Manufacturing, 9-10 July, 2012, Loughborough, UK, 19 S. (2012)
Flege, C., Vogt, F., Höges, S., Jauer, L., Borinski, L., Schulte, V., Hoffmann, R., Poprawe, R., Meiners, W., Jobmann, M., Wissenbach, K., Blindt, R.:
Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting
Journal of Materials Science: Materials in Medicine,24(1), 241-255, (2012)
https://doi.org/10.1007/s10856-012-4779-z
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Santos Batista, R. J., Wissenbach, K., Poprawe, R.:
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
Acta Mat. 60(9), 3849-3860, (2012)
https://doi.org/10.1016/j.actamat.2012.04.006
Gu, D., Meiners, W., Wissenbach, K., Poprawe, R.:
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Int. Mat. Rev., 32 S., (2012)
https://doi.org/10.1179/1743280411Y.0000000014
Merkt, S., Hinke, C., Gradl, P.:
Technology-adapted product design methods for laser based Additive Manufacturing
Proceedings of Fraunhofer Direct Digital Manufacturing Conference (2012)
Merkt, S., Hinke, C., Schleifenbaum, H., Voswinckel, H.:
Geometric complexity analysis in an integrative technology evaluation model (ITEM) for selective laser melting (SLM)
South African Journal of Industrial Engineering, Vol 23 (2), pp 97-105 (2012)
Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., Bültmann, J.:
High Power Selective Laser Melting (HP SLM) of Aluminum Parts
6th International WLT Conference on Lasers in Manufacturing LIM, Munich, (2011)
https://doi.org/10.1016/j.phpro.2011.03.035
Gu, D., Hagedorn, YC., Meiners, W., Wissenbach, K., Poprawe, R.:
Selective laser melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance
Surface and Coatings Technology 205(10), 3285-3292, (2011)
https://doi.org/10.1016/j.surfcoat.2010.11.051
Hagedorn, Y., Dierkes, S.:
Generative Fertigung vollkeramischer Gerüste
Digital Dental News, (2011)
Hagedorn, Y., Meiners, W., Wissenbach, K., Poprawe, R.:
Additive Manufacturing of Alumina Zirconia Ceramic Compounds by Selective Laser Melting
12th Conference of the European Ceramic Society (ECerS), 2011, Stockholm,
(2011)
https://doi.org/10.1016/j.phpro.2010.08.086
Lindner, M., Hoeges, S., Meiners, W., Wissenbach, K., Smeets, R., Telle, R., Poprawe, R., Fischer, H.:
Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique
Journal of Biomedical Materials Research Part A 97(4), 466-471, (2011)
https://doi.org/10.1002/jbm.a.33058
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., Bültmann, J.:
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
6th International WLT Conference on Lasers in Manufacturing, LiM Munich (2011)
https://doi.org/10.1016/j.phpro.2011.03.085
Morsbach, C., Höges, S., Meiners, W.:
Modeling the selective laser melting of polyactide composite materials
Journal of laser applications : JLA 23(1), (2011)
https://doi.org/10.2351/1.3538944
Schleifenbaum, H., Diatlov, A., Hinke, C., Bältmann, J., Voswinckel, H.:
Direct photonic production: towards high speed additive manufacturing of individualized goods
Production Engineering 5, 359–371 (2011)
https://doi.org/10.1007/s11740-011-0331-0
Voswinckel, H., Schleifenbaum, H., Bambach, M., Hirt, G.:
Design for manufacture based on an integrated product process design model
14th International Conference Sheet Metal, SheMet 2011
https://doi.org/10.4028/www.scientific.net/KEM.473.799
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., Wissenbach, K.:
Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders
Rapid Prototyping Journal 16(6), 450-459, (2010)
https://doi.org/10.1108/13552541011083371
Gasser, A., Meiners, W., Weisheit, A., Willenborg, E., Stollenwerk, J., Wissenbach, K.:
Maßgeschneiderte Oberflächen und Bauteile. Tl.1 : Der Einsatz von Laserstrahlung in der Oberflächentechnik und im Rapid Manufacturing
Laser-Technik-Journal 7(4), (2010)
https://doi.org/10.1002/latj.201090061
Gasser, A., Meiners, W., Weisheit, A., Willenborg, E., Stollenwerk, J., Wissenbach, K., Olaineck, C.:
Maßgeschneiderte Oberflächen und Bauteile. Tl.2 : Case Studies
Laser Technik Journal 7(6), 22-26, (2010)
https://doi.org/10.1002/latj.201090087
Gu, D., Meiners, W., Hagedorn, YC., Wissenbach, K., Poprawe, R.:
Bulk-form TiCx/Ti nanocomposites with controlled nanostructure prepared by a new method: Selective laser melting
Journal of Physics D, Applied Physics 43(29), (2010)
https://doi.org/10.1088/0022-3727/43/29/295402
Gu, D., Meiners, W., Hagedorn, YC., Wissenbach, K., Poprawe, R.:
Structural evolution and formation mechanisms of TiC/Ti nanocomposited prepared by high-energy mechanical alloying
Journal of Physics D, Applied Physics 43(13), (2010)
https://doi.org/10.1088/0022-3727/43/13/135402
Gu, D., Meiners, W., Li, C., Shen, Y.:
In situ synthesized TiC/Ti5Si3 nanocomposites by high-energy mechanical alloying: Microstructural development and its mechanism
Materials Science and Engineering A, Structural materials, properties, microstructure and processing 527(23), 6340-6345, (2010)
https://doi.org/10.1016/j.msea.2010.06.052
Gu, DD., Meiners, W.:
Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by selective laser melting
Materials Science and Engineering A, Structural materials, properties, microstructure and processing 527(29-30), 7585-7592, (2010)
https://doi.org/10.1016/j.msea.2010.08.075
Hagedorn, Y., Wilkes, J., Meiners, W., Wissenbach, K., Poprawe, R.:
Additive Manufacturing of Ceramic Parts by Selective Laser Melting
Additive Manufacturing International Conference 2010, Loughborough, (2010)
Hagedorn, YC., Wilkes, J., Meiners, W., Wissenbach, K., Poprawe, R.:
Net shaped high performance oxide ceramic parts by selective laser melting
6th International Conference on Laser Assisted Net Shape Engineering (LANE), 2010, Erlangen (2010)
https://doi.org/10.1016/j.phpro.2010.08.086
Höges, S.:
Entwicklung des Selective Laser Melting zur Verarbeitung bioresorbierbarer medizinischer Werkstoffe
Dissertation, RWTH Aachen University, (2010)
Höges, S.:
Wirtschaftliche Herstellung individueller Implantate
MM - Maschinenmarkt Das IndustrieMagazin 26/2010, 20-23, (2010)
Höges, S., Lindner, M., Meiners, W., Smeets, R.:
Bioresorbable Implants Using Selective Laser Melting
21st Solid Freeform Fabrication Symposium (SFF), 2010, Austin, (2010)
Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C.:
Individualized production by means of high power Selective Laser Melting
CIRP Journal of Manufacturing Science and Technology 2(3), 161-169, (2010)
https://doi.org/10.1016/j.cirpj.2010.03.005
Schleifenbaum, JH., Theis, J., Meiners, W., Wissenbach, K., Diatlov, A., Bültmann, J., Voswinckel, H.:
High power selective laser melting (HP SLM) - Upscaling the productivity of additive metal manufacturing towards factor 10
21st Solid Freeform Fabrication Symposium (SFF), 2010, Austin, (2010)
Schleifenbaum, JH., Uam, JY., Schuh, G., Hinke, C.:
How Can Reynolds Help to Improve the Performance of Production Systems? Fluid Dynamics and its Contributions to Production Theory
AIP Conference Proceedings 1247(1), 443-456, (2010)
https://doi.org/10.1063/1.3460251
Vogt, F., Flege, C., Hoeges, S., Borinski, M., Schulte, VA., Hoffmann, R., Marx, N., Poprawe, R., Wissenbach, K., Blindt, R.:
Development and evaluation of a novel Poly-L-Lactic acid/caprolactone copolymer coronary stent manufactured by selective laser melting
78th European Atherosclerosis Society Congress (EAS), 2010, Hamburg
(2010)
https://doi.org/10.1016/S1567-5688(10)70913-2
Wilkes, J., Hagedorn, YC., Ocylok, S., Meiners, W., Wissenbach, K.:
Rapid manufacturing of ceramic parts by selective laser melting
34th International Conference on Advanced Ceramics & Composites, 2010, Daytona Beach, (2010)
https://doi.org/10.1002/9780470944066.ch13
Yves-Christian, H., Jan, W., Wilhelm, M., Konrad, W., Reinhart, P.:
Net shaped high performance oxide ceramic parts by selective laser melting
Physics Procedia 5, Part 2, 587-594, (2010)
https://doi.org/10.1016/j.phpro.2010.08.086
Becker, D.:
Additive manufacturing of components out of copper by selective laser melting
4th International Conference on Advanced Research in Virtual and Rapid Prototyping (VR@P), (2009)
Becker, D., Meiners, W., Wissenbach, K.:
Additive manufacturing of copper alloys by Selective Laser Melting
5th International WLT-Conference Lasers in Manufacturing, LiM 2009, Munich,
(2009)
Buchbinder, D., Meiners, W., Wissenbach, K., Müller-Lohmeier, K., Brandl, E., Skrynecki, N.:
Rapid Manufacturing of Aluminium Parts for Serial Production via Selective Laser Melting (SLM)
4th International Conference on Rapid Manufacturing, 2009, Loughborough, 1-12, (2009)
Buchbinder, D., Schleifenbaum, H.:
Wirtschaftliche Alternative : Neue Perspektiven zum Rapid Manufacturing von Aluminiumbauteilen für die Serienproduktion
Gießerei-Erfahrungsaustausch 53(4), 18-20, (2009)
Höges, S., Lindner, M., Fischer, H., Meiners, W., Wissenbach, K.:
Manufacturing of bone substitute implants using selective laser melting
4th European Conference of the International Federation for Medical and Biological Engineering (ECIFMBE), 2008, Antwerp, (2009)
https://doi.org/10.1007/978-3-540-89208-3_534
Schleifenbaum, H., Meiners, W., Wissenbach, K.:
Individualisierte Produktion mittels High Power Selective Laser Melting (SLM)
WT-Online Jun 09, 376-383, (2009)
Schleifenbaum, H., Meiners, W., Wissenbach, K.:
Individualized production by means of High Power Selective Laser Melting
42nd CIRP Conference on Manufacturing Systems - Sustainable development of Manufacturing Systems, (2009)
https://doi.org/10.1016/j.cirpj.2010.03.005
Schleifenbaum, H., Meiners, W., Wissenbach, K.:
Individualisierte Produktion mittels High Power Selective Laser Melting (SLM) : Erhöhung der Effizienz laserbasierter generativer Fertigungsverfahren durch den Einsatz neuer Hochleistungsstrahlquellen
wt Werkstattstechnik online 99, Nr. 6, 376-383, (2009)
Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C.:
High Power Selective Laser Melting: A new approach for individualized series production
28th International Congress on Applications of Lasers & Electro-Optics (ICALEO), 2009, Orlando, (2009)
https://doi.org/10.2351/1.5061585
Höges, S., Meiners, W.:
SLM von Polylactiden zur Herstellung von resorbierbaren Implantaten
RTejournal - Forum für Rapid Technologie Jun 09, Nr. 6, (2009)
Jaeger, CR., Koplin, C., Gurr, M., Meiners, W.:
Internal stresses and shape distortions in generatively manufactured implants
World Conference on Regenerative Medicine (WRM), 2009, Leipzig (2009)
Schleifenbaum, H., Uam, JY., Schuh, G., Hinke, C.:
Turbulence in Production Systems - Fluid Dynamics and its Contributions to Production Theory
International Conference on Systems Engineering and Engineering Management 2009, San Francisco, (2009)
Wilkes, JI.:
Selektives Laserschmelzen zur generativen Herstellung von Bauteilen aus hochfester Oxidkeramik
Dissertation, RWTH Aachen University, (2009)
Beckemper, S,. Bremus, KE., Gillner, A., Höges, S., Poprawe, R., Wissenbach, K.:
Mit Licht Werkstoffe funktionalisieren. Neue Fertigungstechniken ermöglichen künstliche Bauteile nach dem Vorbild der Natur
RWTH Themen 01/2008, 52-54, (2008)
Buchbinder, D.:
So fest wie Druckguss-Teile
Industrieanzeiger 130, Nr. 48, 38-39, (2008)
Buchbinder, D., Meiners, W., Wissenbach, K., Müller-Lohmeier, K., Brandl, E.:
Rapid Manufacturing of Aluminium Parts for Serial Production via Selective Laser Melting (SLM)
11th International Conference on Aluminium Alloys (ICAA 11), 2008, Aachen
(2008)
Kelbassa, I., Albus, P., Dietrich, J., Wilkes, J.:
Manufacture and repair of aero engine components using laser technology
3rd Pacific International Conference on Applications of Lasers and Optics (PICALO), (2008)
https://doi.org/10.2351/1.5057008
Poprawe, R., Gillner, A., Hoffmann, HD., Kaierle, S., Loosen, P., Meiners, W., Noll, R., Willenborg, E.:
Disk, fiber, rod, slab: New laser concepts open new application perspectives
6th International Conference on Photonics, Devices, and Systems, Prag, (2008)
https://doi.org/10.1117/12.817967
Schleifenbaum, H., Meiners, W., Wissenbach, K.:
Towards rapid manufacturing for series production: An ongoing process report on increasing the build rate of selective laser melting (SLM)
Euro-uRapid 2008: International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing, (2008)
Fraunhofer-Institut für Lasertechnik ILT
